8011 aluminum foil contains Mn and Mg elements, so aluminum foil has good strength and corrosion resistance.
It meets the food-grade standard. The 8011 aluminum foil brush water produced by lichen is grade A, with a low ear-making rate.
High cup convex value, less pinhole, good sealing.
There is no impurity on the surface of the aluminum foil, the oil is clean, the plate is flat, clean, and hygienic.
High recycling rate and no pollution to the environment.
8011 Aluminium Foil Technical Parameter
| Ingredient | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Al |
| Content | 0.5-0.9 | 0.6-1 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | 0.08 | 0.15 | Margin |
| Alloy Type | 8011 aluminium foil | |||||||||
| Alloy State | F, O, H14, H16, H18, H19, H22, H24, H26, H28 | |||||||||
| Thickness (mm) | 0.006~0.03mm | |||||||||
| Width (mm) | 100-1600 | |||||||||
| Length | Jumbo roll | |||||||||
8011 Aluminum Foil Applications
Food Use Preparation: Aluminum foil is “dual-ovenable” and can be used in both convection and fanassisted ovens. A popular use of foil is to cover thinner sections of poultry and meat to prevent overcooking. The USDA also provides recommendations on limited uses of aluminum foil in microwave ovens.
Insulation: Aluminum foil is 88 percent reflective and is widely used for thermal insulation, heat exchanges and cable liners. Foil-backed building insulation not only reflects heat, also provides a protective vapor barrier.
Electronics: Foil in electrical capacitors provides compact storage for electric charges. If the foil surface istreated, the oxide coating works as an insulator. Aluminum foil capacitors are commonly found in electrical equipment, including television sets and computers.
Geochemical Sampling: Aluminum foil is used by geochemists to protect rock samples. Foil provides a seal from organic solvents and does not taint the samples as they are transported from
the field to the lab.Art and Decoration: Anodizing aluminum foil creates an oxide layer on the aluminum surface that can accept colored dyes or metallic salts. Through this technique, aluminum is used to created inexpensive, brightly colored foils.
